2.PRINTING FROM WINDOWS
Setting Up Print Options 51
2 PRINTING FROM WINDOWS
7) Use Custom Margin
Select this check box to set the margin on the printed pages. When this box is selected, click [Details] to
set the margins in the [Custom Margin] dialog box.
The selectable range of the margin width differs depending on the model.
- For the e-STUDIO6570C Series, e-STUDIO6550C Series, e-STUDIO4540C Series, e-STUDIO507
Series, e-STUDIO456 Series, e-STUDIO857 Series, e-STUDIO856 Series, e-STUDIO2550C Series,
e-STUDIO2551C Series, e-STUDIO5055C Series, e-STUDIO407CS Series, e-STUDIO527S Series,
and e-STUDIO306LP
0.17 inch to 3.94 inches / 4.2 mm to 100 mm (The margin width cannot be smaller than 0.17 inches /
4.2 mm.)
For models other than the above, refer to the corresponding Printing Guide / User’s Manual Advanced
Guide.
If [Booklet] is selected on [2-Sided Printing], this option will be disabled.
Enable this function to add the margins if the application does not support the margin function.
When the application has a margin function, use the application’s function rather than this option.
This cannot specify the binding margin for Booklet printing.
8) Poster Print
You can divide a print job onto more than one sheet of paper, so you can create one large image, such as
a poster, by connecting the divided images. If this option is enabled, click [Details] and set the Output
number of Sheets.
The Poster Print option is not available when any of the Custom Paper Size, Number of pages per
sheet, 2-Sided Printing, Watermark, Overlay Image and Sheet Insertion options is set.
The Poster Print option is available only when any of the sizes below is selected for [Print Paper
Size] box on the [Basic] tab. The selectable paper sizes differ depending on the models.
A4, A3, B4, B5, LT, LD
[1x2] is selectable only when A4, A3, B4, or B5 is chosen for [Print Paper Size].
For detailed instructions on how to print with the Poster Print option, see the following page:
P.119 “Dividing one image into multiple sheets (Poster Print)”
To Next Page
Loading...
