2 PRINTING FROM WINDOWS
26 Printing From Application
Cautionary points when LDAP authentication is used
When LDAP authentication is enabled on this equipment, you must specify an LDAP server in the [Server
Name] box on the [Others] tab before printing a document.
If you attempt to send a print job without specifying an LDAP server, the [Specify LDAP Server] dialog box will
appear to ask you to do so.
In this case, specify the desired LDAP server in the [Server Name] box and click [OK] to send the job.
You can make settings for LDAP authentication on the [Device Settings] tab.
P.90 “Setting up LDAP servers”
To Next Page
Loading...
