15
1
Turning ON/OFF
Turning On/O
This section explains how to turn the power on and o as well as the energy saving mode.
Turning on
Press the [POWER] button
• The equipment starts warming up. The
message is displayed to inform you that the
equipment is warming up. This may take longer
than normal depending on the status and
condition.
• While the equipment is warming up, you can
use the auto job start function. For details, see
the following guide:
& Copying Guide (PDF) : “Chapter 2: HOW TO
MAKE COPIES” - “Basic Copying Procedure”
The home screen is displayed when ready.
When turning o, you also need to shut down by pressing the [POWER] button on the control panel. For
details, see the following page:
& P.16 “Turning o”
Log in to the equipment if you are managing this equipment with the Department Management function or
User Management function.
& P.67 “Logging in”
To Next Page
Loading...
