Chapter 2 BASIC OPERATIONS
28
Copying Operations
This section explains procedures such as enlarging/reducing, duplex copying, and bypass copying.
Making copies
Press [Copy] on the home screen.
Place the original.
& P.19 “Placing originals”
Press the [START] button. Copying starts.
Specify the
number of copies,
orientation, and
mode as necessary.
• When an original is set on the original glass,
press [Job Finish] aer all pages are
scanned.
• To stop copying, press [Stop].
• Printouts are ejected to the exit tray or the
receiving tray of the Finisher. The tray to
which the paper is ejected is indicated by
the arrow on the touch panel.
• You can switch the color mode. The
following modes are available.
Full Color: Copies in full color. (Default)
Black: Copies in black and white.
Auto Color: Automatically determines the
color of the originals.
• If you want to give the priority to the
resolution rather than the speed when
copying is attempted by selecting [Full
Color] or [Auto Color], specify [600dpi].
To Next Page
Loading...
