Toshiba e-STUDIO400AC - Page 19

1
19
Placing Paper and Originals
Placing originals
Original glass
1
Raise the Dual Scan Document Feeder.
2
Place the original face down on the
original glass and align it with the le rear
corner.
3
Lower the Dual Scan Document Feeder.
& Copying Guide (PDF) : “Chapter 2: HOW TO
MAKE COPIES” - “Enlarging or Reducing Images”
Dual Scan Document Feeder
1
Place the originals face up on the original
feeder tray.
2
Align the side guides to the original length.
Do not place any heavy objects (4 kg (9 lb.) or
over) on the original glass and do not press on it
with force.
Breaking the glass could injure you.
When an original is scanned from the original glass,
specify the original size.