Copying Operations
31
2
Density adjustment
Press or to adjust the density
manually.
To lighten, press , to darken, press .
Press [Auto] to adjust the density
automatically.
Bypass copying
Place paper face down on the
bypass tray, and then align the
side guides to the paper length.
Press the button
corresponding to the size of
paper set on the bypass tray, and
then
[OK].
Press the [START] button. Bypass
copying starts.
Press [Paper Type] if the paper on the bypass tray is
other than plain paper.
By default, density adjustment is set to
[Auto] when the color mode is “Black”.
To Next Page
Loading...
