1.TROUBLESHOOTING FOR THE HARDWARE
Cleaning the Inside of the Equipment 95
TROUBLESHOOTING FOR THE HARDWARE
6
Hold the cleaner with the black part on the top of the cleaner upwards.
Do not touch the pad at the top of the cleaner, because the toner on the pad may stick to your hands and the
cleaner pad may be stained.
7
Insert the cleaner through the service hole of each developer unit to clean it.
8
Insert the cleaner all the way in, and then pull it back out. Repeat this 3 times for each color.
9
Attach the cleaner with its top on the right and its holding side on the left.
Check that the cleaner is fixed to the cover.
To Next Page
Loading...
