Toshiba E-STUDIO4508A - Avoiding Bleed-Through (Background Adjustment); Canceling Background Adjustment

110 Avoiding Bleed-through (Background adjustment)
0.Avoiding Bleed-through (Background adjustment)
This function allows you to adjust the density of the original’s background. It avoids the back side of a 2-sided original
becoming visible on its front side.
This mode cannot be used with the automatic density adjustment function.
 P.42 “Adjusting Density”
1
Press [BACKGROUND ADJUSTMENT] in the IMAGE menu.
2
Press [LIGHT] or [DARK] to adjust the density, and then press [OK].
 Canceling background adjustment
 Move the indicator to the middle, and then press [OK].
 Press [RESET], and then [OK].
Front Back
Not adjusted
Adjusted to have
a lightened
background