Toshiba E-STUDIO4508A - Adjusting Density; Adjusting Automatically (Automatic Density Adjustment); Adjusting Manually

42 Adjusting Density
0.Adjusting Density
This equipment detects the density level of originals and automatically adjusts the density level of the copied image
to the optimal one. Alternatively, you can manually adjust it to the desired level.
 Adjusting automatically (automatic density adjustment)
Press [AUTO] on the touch panel.
The default setting of the automatic density adjustment is as follows according to the color modes:
FULL COLOR or AUTO COLOR: OFF
BLACK: ON
 Adjusting manually
Press either or to select the desired density level.