Toshiba e-STUDIO453 - Page 50

2 - 30
2
2
e-STUDIO350/352/353/450/452/453
OUTLINE OF THE MACHINE
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-513
[H] Receiving tray
(1) Remove 2 screws and take off the receiving
tray.
Fig. 2-515
[I] Tray back cover
(1) Take off the receiving tray ( Chapter 2.5.1
[H]).
(2) Take off the scan base cover.
Fig. 2-514
(3) Remove 1 screw and take off the receiving
tray back cover.
1
2
Scan base cover
04/05
Fig. 2-516
[J] Left cover
(1) Remove 3 screws and take off the left cover.