1 TROUBLESHOOTING FOR THE HARDWARE
48 Clearing a Staple Jam
7
Holding the knob, raise the guide, and return it to its
original position.
8
Remove the staples fallen between the staple
cartridge and the staple case or the ones in the staple
receiver.
9
Fit the staple cartridge into the stapler.
Insert the cartridge until it is caught by the latch and fixed with a click.
10
Return the Hole Punch Unit to its original position.
11
Carefully return the finisher to its original position.
Do not put your hand or fingers on the top of the finisher when
closing it.
They could be caught and this could injure you.
To Next Page
Loading...
