Toshiba E-studio4555c - Chapter 5 ADVANCED FUNCTIONS

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Staple Jam 49
1 TROUBLESHOOTING FOR THE HARDWARE
 Staple jam in the Saddle Stitch unit
12
Close the front cover of the finisher.
1
Open the front cover of the finisher, and pull out the
Saddle Stitch unit until it stops.
2
Remove the staple cartridge.
3
Raise the guide while holding the knob.
Do not touch the stapling area.
The actual needle point could cause you personal injury.
4
Remove the top staple sheet.
2
1
2
1