Toshiba E-STUDIO5508A - Email Direct Printing

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 29
TROUBLESHOOTING FOR THE HARDWARE
2
Remove the misfed paper.
3
Close the duplexing unit putting your hands on the position shown in the figure.
Do not put your hand or fingers on the duplexing unit when closing it.
They could be caught and this could injure you.
 Fuser unit
1
Pushing the lock lever, pull out the duplexing unit from the equipment until it stops.
Be careful not to touch the slide rails (A in the figure).
This could injure you.
2
Open the transport guide holding the green knob and then release the misfed paper.
A
A
22
11 11