5 OTHER SCANNING METHODS
Scanning Images Using the TOSHIBA e-STUDIO WIA Driver 105
Scanning Images Using the TOSHIBA e-STUDIO WIA Driver
The Client Utilities CD-ROM or the Client Utilities/User Documentation DVD includes the TOSHIBA
e-STUDIO WIA Driver for users of Windows Vista / Windows 7 / Windows 8 / Windows Server 2003 /
Windows Server 2008 / Windows Server 2012. This driver can be used together with a WIA-compliant
application, such as Microsoft Paint supported by Windows Vista, to scan images on the equipment and load
them to your client computer.
If only the Department Management features are enabled, the department code needs to be entered.
For instructions on how to install the driver, refer to the Software Installation Guide. For instructions on how
to scan and acquire images to your computer, refer to the documentation that comes with your WIA-compliant
application.
If you are using Windows Server 2003, follow the procedure below to register this equipment to the
TOSHIBA e-STUDIO WIA Driver after the installation of the driver.
1. Double-click [Scanners and Cameras] of [Control Panel].
2. Right-click [TOSHIBA e-STUDIO WIA Driver] and then click [Properties].
3. Click [Discover] on the [Device Setting] tab menu.
4. Click [Start Discovery].
5. Select this equipment and then click [OK].
6. Click [OK].
Scan originals using
the TOSHIBA e-STUDIO WIA Driver
Originals
Import your scans to
a WIA-compliant application
Windows Vista
Windows 7
Windows 8
Windows Server 2003
Windows Server 2008
Windows Server 2012
Connecting over TCP/IP Network
To Next Page
Loading...
Need help?
General
