Toshiba e-studio650 - Short-Sized Original Exit Jam; Transport Jam at Scanning Section

e-STUDIO550/650/810 TROUBLE SHOOTING 5 - 34 JUNE 2002 © TOSHIBA TEC
[E76] Short-sized original exit jam
Are the registration roller, read roller, intermediate transport roller and small original reverse roller tainted?
Clean up the rollers.
Are the small original exit flapper and small original reverse flapper operating normally?
Adjust the small original exit solenoid.
[E77] Transport jam at scanning section
Are the registration sensor and read roller tainted?
Clean up the roller.
NO
YES