2.OPERATIONS WITH THIS EQUIPMENT
Storing Documents 23
OPERATIONS WITH THIS EQUIPMENT
Copying the next original (copy)
Depending on how the original is set, the confirmation screen to copy next the original may be displayed. Repeat
the procedure below as many times as necessary. When the scanning of the last page of the original finishes,
press [Job Finish].
If the originals are being set on the glass, place the next original and press [Next Copy] to start scanning.
When the original is set on the ADF in the SADF (single feed mode), scanning will start when the next original is
set. (You do not need to press any key.)
To Next Page
Loading...
