38
Getting Started
Using the device for the first time
Using the device for the first time
The device is now ready for you to turn it on and begin using
it, see “Exploring Your Device’s Features” on page 75.
Turning on the power
To turn on the device:
1 Make sure any external devices (such as the USB/AC
adaptor, if you plan to use AC power rather than battery
power) are properly connected and ready.
2 Check to ensure that all slots are empty.
3 Press and hold the Power button for several seconds.
(Sample Illustration) Turning on the power
Small bright dots may appear on your screen display when
you turn on your device. Your display contains an extremely
large number of thin-film transistors (TFT) and is
manufactured using high-precision technology. Any small
bright dots that may appear on your display are an intrinsic
characteristic of the TFT manufacturing technology. Over a
period of time, and depending on the usage of the device,
the brightness of the screen will deteriorate. This is also an
intrinsic characteristic of the screen technology. When the
device is operated on battery power, the screen will dim and
you may not be able to increase the brightness of the screen
while on battery power.
Initial setup
The Startup screen is the first screen displayed when you
turn on your device for the first time. Follow the on-screen
instructions on each screen in order to properly install the
operating system and begin using your device.
To Next Page
Loading...
Need help?
General