66
Mobile Computing
Charging the battery
TECHNICAL NOTE: Depending on your system, the RTC
battery may only charge while the device is turned on.
Power management
Your device ships with the power management options
preset to a configuration that will provide the most stable
operating environment and optimum system performance for
both AC power and battery modes.
Changes to these settings may result in system
performance or stability issues. Users who are not
completely familiar with the power management
component of the system should use the preset
configuration. For assistance with setup changes,
contact Toshiba’s Customer Support Center.
Charging the battery
If the device is leaking or its case is cracked, put on
protective gloves to handle it.
Your device’s battery is not accessible to the user.
Your device contains a rechargeable battery that may need
to be charged prior to use.
To use external power or to charge the battery you must
attach the USB/AC adaptor. See “Connecting to a power
source” on page 36.
To charge the device plug it into a power source.
Battery life and charge time may vary depending on the
external conditions, or the applications and features
used.
Please handle your device carefully to avoid scratching or
damaging the surface.
NOTE
NOTE
NOTE
To Next Page
Loading...
Need help?
General