7.1. Disassembling Procedures
Step Tool
38
Photo Description Note
Disassembling Procedures
Turn off the battery switch
of the main unit indicated
by the arrow.
The lock will be released
and the upper gap will be
made.
Release the center lock
and remove the top panel.
Insert the flathead
screwdriver between the
side panel and top panel.
Lift up the top panel by
pushing the screwdriver.
Screwdriver
(blade
width: about
1.8mm)
Insert the flathead
screwdriver into the gap.
Similarly, remove the
bottom panel.
2
㪈
6
5
4
3
To Next Page
Loading...
Need help?
General
