To unlock channels:
1. Press MENU, then press • or • to display the OPTION menu.
2. Press • or • to highlight LOCK and then press • or • to display
the LOCK menu.
3. Use the Channel Number buttons (0-9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
4. Press • or • to highlight CH LOCK and press • or • to display
the CH LOCK menu.
5. Press • or • to highlight CLEAR and clear all channels from the
list of locked channels. Press ENTER.
6. Press EXIT to return to the normal viewing.
Locking video input
With the VIDEO LOCK feature, you can lock out the input sources
(VIDEO1, VIDEO2, VIDEO3, COLORSTREAM) and channel 3 and 4.
You will not be able to select the input sources with the TV/VIDEO
button or Channel buttons unless you clear the setting.
To set up the video lock:
1. Use the Channel Number Buttons (0-9) to display the television
channel you wish to lock.
2. Press MENU, then press • or • to display the OPTION menu.
3. Press • or • to highlight LOCK.
4. Press • or • to display the LOCK menu.
5. Use the Channel Number buttons (0-9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
6. Press • or • to highlight VIDEO
LOCK.
7. Press • or • to select:
• OFF: Unlocks all video input
sources.
• VIDEO: Locks VIDEO1, VIDEO2,
VIDEO3 and COLORSTREAM.
• VIDEO +: Locks VIDEO1, VIDEO2,
VIDEO3, CQLORSTREAM, channel 3
?
CHLOCK START
SELECT ADJUST _1 I•
and channel 4. This option should be used if you use the antenna
terminal to play a video tape,
8. Press EXIT to return to the normal viewing.
Setting the game timer
With the GAME TIMER feature, you can automatically activate the
VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a
TV game (30, 60 or 90 minutes).
To set up the game timer:
1. Press MENU, then press • or • to display the OPTION menu.
2. Press • or • to highlight LOCK.
3. Press • or • to display the LOCK menu.
4. Use the Channel Number buttons (0-9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
5. Press • or • to highlight GAME TIMER.
6. Press • or • to select a time limit (30
minutes, 60 minutes, 90 minutes or
OFF).
7. Press EXIT to return to normal
viewing. After the GAME TIMER is
programmed, the display will appear
briefly every ten minutes to remind you
that the GAME TIMER is operting.
PICTURE AUD0 SETUP
I
CH LOCK START • I
V,DEOLOCK OfF
30 60 90 I
NEWPINCODE START •
SELECT AV ADJUST 41 I_
When the programmed end time is reached, the display will
change the last channel automatically.
Channel
Numbers
AV<b
Menu/
Enter
Exit
19
To Next Page
Loading...
