Name: Toshiba G9 ASD
Brand: Toshiba
Rating: 5 (1 reviews)

To Next Page

G9 ASD

Simple Start Guide

G9 ASD Simple Start Guide

The G9

ASD

Simple Start Guide provides instructions on installation and operating procedures only.

For additional information regarding your new G9 ASD, consult the

G9 ASD Installation and Operation Manual

DO NOT

attempt to install or operate the G9 ASD until you have read and understood all of the user directions

contained in this guide, and the product safety information and product labels contained in the

G9 ASD Installation

and Operation Manual

. Equipment wa rning labels pr ovide use ful inform at ion and ind ica te an imm in ent ly haz ard ous

situation that may result in serious injury, severe property and equipment damage, or loss of life if safe procedures are

not followed. Installation and operation shall be performed by qualified personnel only.

Frequently Asked Questions

General

I did not receive an Installation and Operation Manual with my ASD. How can I get one?

The

G9 ASD Qu ick Start Guide

and

the

ASD

Installation and Operation Manual

can be downloaded from our website

at www.toshiba.com/ind. To request a hard-copy of either document

contact the Toshiba Customer Support Center or your local Toshiba distributor.

Does To shiba of fer training course s?

Yes. Train ing cours es are of f ered at TIC

headquarters in Houston, Texas. There are two types of training — maintenance and repair (nominal fee), and applications (free). Our instructors have years

of hands-on experience in their respective fields and are continually being trained on new products. Students will gain valuable experience on the equipment and troubleshoot real faults that may

be incurred during normal ASD setup, operation, and maintenance.

For a listing of upcoming training courses or to register, visit our website at www.toshiba.com/ind and click on the training tab.

Where can I find

additional information about Toshiba International Corporation (TIC) and TIC products?

Additional information can be found on our website, www.toshiba.com/ind. You may also contact

TIC for additional information by writing to 13131 West Little York Rd., Houston, Texas, 77041,

via

telephone at (713) 466-0277, or via fax at (713) 937-9349.

Application Specific

Who is considered qualified personnel?

A qualified person is one who has the skills and knowledge about the construction, installation, operation, and maintenance of the equipment and has received safety training on the hazards

involved. Qualified personnel are able to recognize and properly address hazards associated with the application of motor-driven equipment, and are trained to safely energize, de-energize

and

ground said equipment, to safely lockout/tagout circuits and equipment, and clear faults in accordance with established safety practices.

What do I do if my motor is rotating in the wrong direction?

Qualified personnel should reverse any two of the three ASD

output pow er leads (U /T1, V/T2, or W/T3) connected to the motor.

For safety and application-specific reasons I need to remotely mount the ASD. How do I accomplish this?

Select a mounting location that is easily accessible by the user and mark the location of the screw holes. After drilling the screw holes, attach and secure the Electronic Operator Interface (EOI) to

the front side of the mounting location. Connect the extension cable. For information on required hardware or for instructions on remote mounting using a Remote Mounting Kit, consult the

ASD Installation and Operation Manual

If further assistance is required,

contact the Toshiba Customer Support Center.

I followed all of the in structions bu t my mo tor will not run. What now ?

: Ensure that the input power to the ASD is connected and that the voltage at R/L1, S/L2, and T/L3 are as specified for your unit.

Ensure that the terminals of the terminal board are configured

correctly for your application.

Perform a Reset (to factory default settings).

Ensure that the Local/Remote key is as required for your application and that you have provided a run command. If

further assistance is required,

contact the Toshiba Customer Support Center.

During system operation I receive error messages that I do not understand. Where can I find information about trips/faults/alarms and troubleshooting?

A complete list of LED

and