12
2.3 Leveling door
1. Precautions before operation:
Before operation of accessories, it shall be ensured that the refrigerator is disconnected from
power. Before adjusting the door , precautions shall be taken to prevent any personal injury.
2. Schematic diagram of levelling the door body.
(The picture above is only for reference.The actual configuration will depend on the physical
product or statement by the distributor)
When the fridge door is low:
•
Open the door, use a wrench to loosen the locking nut and to rotate the adjusting nut
anti-clockwise to raise the height of the door. Once the doors are aligned, then tighten the
locking nut by rotating it anti-clockwise.
When the fridge door is high:
•
Open the door, use a wrench to rotate the adjusting nut clockwise to lower the height of the
door. Once the doors are aligned, then tighten the locking nut by rotating it anti-clockwise.
Fixed shaft
Adjusting nut
Wrench
Locking nut
Left
Right
Levelling feet
Not level
Wrench
List of tools to be provided by the user
M10
To Next Page
Loading...
