91600XPi Series UPS Installation and Operation Manual – 60616-014
5 Installation Precautions
NOTICE
1. Observe the following environmental restrictions:
• Install the unit in a well-ventilated location; allow at least 4 inches (10 cm) on all sides for air ventilation and for
maintenance.
• Install the unit where the ambient temperature is within the range specied in Appendix A - “Specications”.
• DO NOT install the UPS in areas that are subject to high humidity.
• DO NOT install the UPS in areas that allow exposure to direct sunlight.
• DO NOT install the UPS in areas that allow exposure to high levels of airborne dust, metal particles, or ammable
gases.
• DO NOT install the UPS in areas near sources of electrical noise. Ensuring a proper earth ground will reduce the
eects of electrical noise and will reduce the potential for electrical shock.
• DO NOT install the UPS in areas that would allow uids or any foreign object to get inside the UPS.
2. UPS is intended for permanent installation only. Install the unit in a stable, level and upright position that is free of
excessive vibration.
3. Follow the instructions on the unpacking label axed to the exterior of the UPS.
4. Retain the shipping rails for use as permanent mounting of the UPS.
fig 1
fig 2
1
2
3
Unpacking Instructions
P/N 48537