Need help?Do you have a question about the Toshiba HWS-P1105HR-E and is the answer not in the manual?
General| Heating Capacity (kW) | 3.6 |
|---|---|
| SEER | 6.1 |
| SCOP | 4.0 |
| Refrigerant | R32 |
| Operating Temperature Range (Heating) | -15°C to 24°C |
| Operating Temperature Range (Cooling) | -10 to 46°C |
| Noise Level (Outdoor Unit) | 52 dB(A) |
| Power Supply | 220-240V, 50Hz |
Explains safety indications (DANGER, WARNING, CAUTION) and symbols used in the manual.
Details on turning off power, discharging terminals, forbidden actions, and warnings.
Guidelines for safe handling and use of R410A refrigerant during installation and service.
Detailed wiring diagram for the Hydro unit, showing component connections and terminal layouts.
Detailed wiring diagram for the Outdoor unit, illustrating component connections and terminal layouts.
Depicts the refrigerant flow path, components, and operating modes of the heat pump system.
Explains control logic for hydro unit components like compressor, heaters, pumps, and sensors.
Explains control logic for outdoor unit components like fan, valves, sensors, and protection systems.
Initial checks for power, wiring, sensors, and identification of normal operations mistaken for defects.
Guide to diagnosing issues using error codes from Hydro and Outdoor units, and sensor data.
Step-by-step instructions for replacing major components of the Hydro unit.
Step-by-step instructions for replacing major components of the Outdoor unit.
To Next Page
