185
13. Display Function of Set Temperature and Other Settings
•
•
▼Sensor temperature display calling
<Procedure>
1 Press the [ ] button and the [
] button at same time for 4
seconds or longer on the top screen to display the “FIELD SETTING
MENU”.
2 Press the [
] / [
] button to select “Service monitor” on the
FIELD SETTING MENU screen, then press the [
] button.
3 Press the [
] button to select the unit,
then press the [
] button to display
the status.
1 - 1
1 - 2
1 - 3
1 - 4
1 - 5
1 - 6
1 - 7
1 - 8
SET
Data
SET
To Next Page
Loading...