To Next PageTo Next PageWhat to do if I see residue or metal dust in my Toshiba HWT-1401H8W-E Heat Pump?
If you observe discolored oil, a large quantity of residue, shiny metal dust, or other wear residue or mixture of foreign matter, the existing pipes should not be reused as they are.
What to do if there is a heavy scratch or dent on my Toshiba HWT-1401H8W-E pipe?
If there is a heavy scratch or dent on the pipe, be sure to use new pipes for the refrigerant piping works.
What to do if existing pipe thickness is thinner than specified for my Toshiba Heat Pump?
If the existing pipe thickness is thinner than the specified 'Pipe diameter and thickness,' be sure to use new pipes for the refrigerant piping works.
General| Type | Heat Pump |
|---|---|
| Cooling Capacity | 4.0 kW |
| Power Supply | 220-240V, 50Hz |
| Weight (Indoor Unit) | 10 kg |
| Noise Level (Outdoor Unit) | 50 dB |
External views and dimensions of the hydro unit.
External views and dimensions of the outdoor unit.
Diagram illustrating the water circulation system.
Diagram of the refrigerant cycle.
Wiring diagram for the hydro unit.
Wiring diagram for the outdoor unit.
Wiring diagram for the hot water cylinder unit.
Electrical component ratings for the hydro unit.
Electrical component ratings for the outdoor unit.
Electrical component ratings for the hot water cylinder unit.
Details and layout of the water heat exchange control board.
Details and layout of the outdoor control board.
