EasyManua.ls Logo

Toshiba KM5020 - Station Preference Settings (cont.); Remote Call Forward;DND Password; Traveling COS Change Privilege; TGAC Override Configuration

Toshiba KM5020
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PREFERENCE Remote CF/DND Password
2-6 IPT Installation Manual July, 2013
Remote CF/DND
Password
Password to remotely set or cancel DND or Station Call Forward from
another IPedge/VIPedge station.
(default = no data)
Travel COS Change Privilege to Change the Traveling Class of Service Override Code.
Enabled or Disabled (default = Disabled)
TGAC Override Trunk Group Access Code Override for Attendant console.
Enabled or Disabled (default = Disabled)
Call Waiting Tone Enable: If you want your telephone speaker to beep when you are on an
existing call and receive another call. Also, if this feature is enabled the
beep tones can be sent to your telephone Handset/Headset as follows:
On your LCD telephone, press 369 and Hold key simultaneously, Select 0
and press key FB01 to turn its light ON, then press Hold again and go off
and on hook.
Disable: If you do not want your telephone to beep when you are on an
existing call.
Enable (default) or Disable
The beep tone can be two beeps or continuous as set in Station, Station
Assignment, Preference, Show advanced configuration, Call Waiting
Tone.
Dial Directory Enable: The telephone User Name will appear in the large display
telephone Direct SS dial directory.
Enabled or Disabled (default = Enabled)
Door Over DND Not Applicable
Network COS Network Class Of Service number. Used when calling across an IPedge
Net network connection.
1~ 32 (default = 1)
Auto OCA OCA occurs automatically when making a call to a busy station that
allows OCA calls to be received.
Enabled or Disabled (default = Enabled)
Originate OCA The privilege to make OCA calls to other stations.
Important!: This privilege must be disabled for all Voice Mail and Auto
Attendant ports.
Enabled or Disabled (default = Enabled)
RSTU Supervision Not Applicable

Table of Contents

Related product manuals