Need help?Do you have a question about the Toshiba KT-R2 and is the answer not in the manual?
Procedure for removing the back cover of the cassette recorder unit.
Steps to detach the front panel assembly from the main unit.
Instructions for accessing and opening the printed circuit board.
Instructions for aligning the Intermediate Frequency (IF) stages.
Procedure for tuning and aligning the Radio Frequency (RF) section.
Method for adjusting the free-running frequency of the oscillator.
Steps to adjust the azimuth of the record/playback head.
Location of electrical parts within the main cassette recorder unit.
Location of electrical parts within the FM tuner pack module.
Circuit schematic for the main cassette recorder section.
Circuit schematic for the FM tuner pack module.
Exploded view of the cassette recorder's cabinet and housing parts.
Detailed part numbers for mechanism and cabinet components.
Component part numbers and descriptions for the cassette recorder.
Exploded view of the FM tuner pack's cabinet and housing parts.
Component part numbers and descriptions for the FM tuner pack.
Exploded view of headphone components for TA, TC, AY models.
Exploded view of headphone components for YY, EY, RY, MY models.
Part numbers and descriptions for optional accessories.
General| Brand | Toshiba |
|---|---|
| Model | KT-R2 |
| Recording | No |
| Radio | No |
| Power Supply | 2 x AA batteries |
| Frequency Response | 40 Hz - 12 kHz |
| Wow and Flutter | 0.15% WRMS |
| Type | Portable Cassette Player |
To Next Page
