To Next Page
L
Linda DavisSep 7, 2025
What does L04 error mean on Toshiba MCY-MHP0406HT-E Air Conditioner?
- MmedinathomasSep 7, 2025
If your Toshiba Air Conditioner is showing error code L04, it means there is an outdoor system address duplicated.
What does L04 error mean on Toshiba MCY-MHP0406HT-E Air Conditioner?
If your Toshiba Air Conditioner is showing error code L04, it means there is an outdoor system address duplicated.
What does E08 error mean on Toshiba Air Conditioner?
The E08 error on your Toshiba Air Conditioner indicates duplicated indoor addresses.
What does F24 error mean on Toshiba MCY-MHP0406HT-E?
If your Toshiba Air Conditioner displays the error code F24, it indicates a Pd sensor error.
What is the F23 error on a Toshiba MCY-MHP0406HT-E Air Conditioner?
If your Toshiba Air Conditioner displays the error code F23, it indicates a Ps sensor error.
What to do if a check code is displayed on the Toshiba Air Conditioner remote controller?
If a check code appears on your Toshiba Air Conditioner's remote controller, it could be due to several reasons: * The outdoor unit power might be off: Ensure the outdoor unit is powered on. * Address setup errors: Redo the address setup, as there may be undefined or mismatched line addresses, or duplicated indoor addresses. * Communication issues: Check the communication connector between the indoor and outdoor units and verify SW30 bit 2 on the outdoor unit.
What does H03 error mean on Toshiba Air Conditioner?
If your Toshiba Air Conditioner displays error code H03, it indicates a current detective circuit system error.
What does error F31 mean for Toshiba MCY-MHP0406HT-E?
If your Toshiba Air Conditioner displays error F31, this indicates an Outdoor EEPROM error.
What does E07 mean on a Toshiba Air Conditioner?
The E07 error on your Toshiba Air Conditioner indicates an Indoor / Outdoor communication circuit error.
Why is my Toshiba MCY-MHP0406HT-E Air Conditioner showing H02 error?
If your Toshiba Air Conditioner is showing error code H02, it means there is a compressor trouble (Lock).
What to do if Toshiba MCY-MHP0406HT-E displays a check code due to undefined indoor addresses?
If a check code appears on the remote controller of your Toshiba Air Conditioner and it's due to address setup errors with undefined indoor addresses, set up the addresses again and modify the setup.
General| Brand | Toshiba |
|---|---|
| Model | MCY-MHP0406HT-E |
| Category | Air Conditioner |
| Language | English |
