38
Function setup
Setting procedure
Press SETUP during stop mode.
The following on-screen display
appears.
1
2
3
To make SETUP screen disappear, press
SETUP or RETURN.
5
Customizing the function settings
You can change the default settings to customize performance
to your preference.
ENTER
C/D/B/A
• Repeat steps 3 and 4 to change
other settings.
• To select another operation, go
back to step 2 by pressing C
repeatedly.
Press B or A to select the desired section, then
press D or ENTER.
Press
C or D to select the desired option.
4
Change the selection using B or A, by referring
to the corresponding pages 40~42.
SETUP
DVD
VCD
CD
/Enter/Setup/Return
RETURN
Function setup
5S00201A [E] (P38-43) 4/1/05, 3:18 PM38
To Next Page
Loading...
