EN-21
EXAMPLE: 80% Power Level for 5 minutes followed by 60% Power Level for 10
minutes; saved as memory 3.
a. Press 3 times, screen displays 3.
b. Press Cook Time, then press "5" , "0" and "0" to set first stage cook time.
c. Press Power Level once, then press "8" to choose 80% first stage cooking power.
d. Press Cook Time again, then press "1", "0", "0" and "0" to set second stage cook time.
e. Press Power Level again, then press "6" to choose 60% second stage cooking power.
f. Press to immediately start multi-stage cooking.
g. To choose the procedure from the memory list, press three times.
Screen will display "3"; press to run procedure.
OPERATION
11. Muti-Stage Cooking
At most 2 stages can be set for cooking. If one stage is Defrost, it will automatically
set to be the first stage.
Auto Menu cannot be set in Multi-stage Cooking.NOTE
NOTE
If you do not want to save a particular multi-stage program as a
procedure, do not press Memory as the first step. Press after
programming both stages.
It is default that the buzzer sounds is open.In waiting state, long pressing on number
8 for 3 seconds, it sounds a long beep, turns off the sound.
When the sounds turn on, long pressing on 8 f or 3 seconds, it sounds a long beep
and the sound turn off. All the buttons has no beep when they are pressed, including
the ending cooking sounds is turn off too.
12. TURN ON/OFF THE BUZZER SOUND
NOTE
All mod els has mute function and energy-saved function.
This function can work under lock function too.
Memory
Memory
To Next Page
Loading...
Need help?
General
