2-10
5. SERVICE ADJUSTMENT MODE
1. Entering to Service Adjustment mode
Press MUTE key on the remote control unit once.
Press again the MUTE key, and keep pressing it.
Keep pressing the MUTE key, press MUTE key on TV set.
Adjusting picture of NTSC mode
120H 8DH
RGB 350
120H 8DH
Adjusting picture of RGB mode
2. Switch-over of Service Adjustment mode
Every pressing of MENU key makes main address switch
over.
161H 1E2H 120H 114H
4. Adjusting method of data
Pressing ADJUST UP/DOWN key on remote control
unit changes the data value ranging from 00H to FFH.
5. Cancellation method of Service mode
The operation of key that accompanies display of
other than from 1 to 4 makes the mode cancel.
During servicing in RGB mode, changing of the
mode of RGB causes cancellation.
6. Other service function
MUTE key : Shipping-out preset
RECALL key: Initializing of memory
Address
Adjustment contents
161H Video section sub-adjustment
1E2H OSD horizontal starting position
120H Deflection section sub-adjustment
114H Multi-sound adjustment
3. Switch-over within Service Adjustment mode
Pressing of VOL UP key on remote control unit or on TV
set makes address switch over cyclically, and VOL DN
key switches over in reverse direction.
a) 161H 107H 163H 108H
b) 1E2H
c) 120H 121H 122H 123H 125H 126H
127H 128H 12AH 111H 112H
d) 114H 115H 116H 116H 117H 118H
119H
Address, Data
Mode display of RGB
To Next Page
Loading...
