43
2-way air discharge cassette type
Part name Q’ty Shape Use Part name Q’ty Shape Use
Installation Manual 1 ——
(Be sure to hand this
over customers)
Installation
gauge
1
For positionin
position
(United with installation pattern)
Heat insulating pipe 2
For heat insulating pipe
connecting section
Pattern fixing
screw
6M5
x
16
l
For attaching the installation
pattern
MMU-AP0301WH
type or lower
1
Fan motor
connector
1
For changing fan motor r.p.m. to
apply higher ceiling
Installation
pattern
MMU-AP0481WH
type
2
——
For checking the
position of the ceiling
openings and the unit
Heat insulator 1 For seal for wire connecting port
Ceiling panel components (2-way air discharge cassette type)
Name Ceiling panel Center panel Air filter
Screw installing panel
Screw installing panel
Shape
(Q'ty)
(1 set) (1 pc)
• RBC-UW466PG :
Attached to indoor unit (4 pcs) (2 pcs)
Usage ——— ———
Attached to ceiling
panel, and removes
dust.
For fixing ceiling
panel
(4 corners)
For tentative hanging
and fixing ceiling panel
(Center part)
1-way air discharge cassette type
Q’ty Q’ty
Part name
AP0071YH
to
AP0121SH
AP0151SH
to
AP0241SH
Shape Usage Part name
AP0091SH
to
AP0121SH
AP0151SH
to
AP0241SH
Shape Usage
Installation
Manual
11——
(Be sure to hand
over customers)
Connector — 1
For motor speed
up when installed
to high ceiling
Heat
Insulating
pipe
22
For heat insulating
of pipe connecting
section
Banding
band
— 10
Used to fix drain
piping
Installation
gauge
— 1
For positioning of
ceiling position
Drain-up
pipe
— 4
For drain-up of
discharge port
Installation
pattern
1 ——
For confirmation of
ceilin
and
main unit position
Pattern
fixing
screw
5 — M5 x 16
l
For attaching
pattern
Ceiling panel components (1-way air discharge cassette type)
Q’ty
Part name
RBC-US135PG, 165PG, 265PG type
Use
Ceiling panel 1 ———
Intake grille 3 ———
Air filter 1 Installs in the intake grille and removes dust and dirt from the air.
Panel installation screw (M5 x 20) 7 For securing the ceiling panel
Screw head insulation 1 set Prevents condensation from forming on screw heads
20mm
M5×20