To Next PageTo Next Page
Need help?Do you have a question about the Toshiba MMK-AP0093H and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | MMK-AP0093H |
| Category | Air Conditioner |
| Language | English |
Details of included parts such as installation plate, remote controller, and mounting screws.
Covers essential safety measures, warnings, and cautions for installation and operation.
Specifies conditions for proper placement and areas to avoid for optimal unit performance.
Lists locations that can negatively impact performance or cause issues, like salt air or oil fumes.
Details required clearances around the indoor unit for installation and service.
Specifies criteria for choosing the mounting location, ensuring proper air flow and access.
Guidelines for optimal placement of the wireless remote controller for signal reception.
Instructions for cutting the wall hole for refrigerant pipes, including diameter specifications.
Steps for securely mounting the installation plate on the wall using screws or anchor bolts.
Guidance on applying heat-insulation to pipes and forming the drain hose.
Instructions on removing the front panel and cutting slits for piping connections.
Procedures for removing and fixing the drain hose and drain cap to prevent water leaks.
Details on bending pipes, connecting auxiliary pipes, and securing wiring for various connection types.
Steps to firmly hook the indoor unit onto the installation plate and secure it.
Instructions for running the drain hose downwards to ensure proper drainage and prevent dew.
Details on using copper pipes, flare nuts, and specific tools for R410A refrigerant.
Information on maximum piping length and height difference between units, referring to outdoor unit manual.
Specifies tightening torque for flare pipe connections to prevent leaks and ensure system integrity.
Instructions for heat insulation of liquid and gas pipes to prevent condensation.
Procedures for airtight testing, air purging, and checking for gas leaks after installation.
Details power supply wire, control wiring, and communication wire specifications for indoor and outdoor units.
Step-by-step guide for connecting power supply and control wires to the indoor unit terminals.
Instructions for connecting the power supply and communication wires for the flow selector unit.
Guide on how to change various settings using the wired remote controller, including initial setup.
Allows adjustment of the filter cleaning notification light's on-time.
Methods to improve heating efficiency by adjusting temperature detection settings.
Instructions for adjusting horizontal and vertical airflow direction using the remote controller or manually.
Information on controlling multiple indoor units simultaneously with a single remote controller.
Essential checks to perform before powering on the unit for the test run, including electrical resistance.
Detailed steps for performing a test run using the wired remote controller or wireless controller.
Specific steps for performing a forced test run using the wireless remote controller.
How to check for active error codes and the indoor unit number where the error occurred.
Procedure to access and review past stored error logs (up to 4 troubles).
Explains how to interpret self-diagnosis displays on remote controllers or outdoor unit boards.
A comprehensive list of check codes, their meanings, and the judging device for troubleshooting.
