K
kimberly22Aug 18, 2025
Why does my Toshiba MMY-MUP0721HT6P-UL Air Conditioner remote controller display a check code?
- DDenise UnderwoodAug 18, 2025
A check code on your Toshiba Air Conditioner remote controller can appear due to several reasons: * The outdoor power might be off. Ensure the header outdoor unit power is on. * There could be address setup issues, such as undefined or mismatched line addresses, duplicated indoor addresses, or a missing header unit in group control. Try setting up the address again. * The terminator resistor setting might be incorrect. Check SW100 bit 1 or bit 2 of the header unit.