27
TV operation
Press MENU, then press or to select
option.
To register password
Notes:
• If you forget the password, you cannot set the V-Chip.
•To avoid forgetting the password, write it down and keep in
the safe place.
Press or to select “PASSWORD”.
1
2
Enter the same password again using Number
buttons (0–9) for safety, then press ENTER.
Now the password was registered
and V-Chip setting menu will appear
on the display.
4
Enter the password (4 digits) using Number
buttons (0–9), then press ENTER.
• If you put a wrong number, press
CANCEL.
3
“ ” appears instead of the number.
Setting the V-Chip
An age limitation can be set to forbid children to watch programs according to
“TV RATING” and “MOVIE RATING” level set. To use the V-Chip function,
you must register a password.
To change password
Enter the new password using Number
buttons (0–9), then press ENTER.
2
In the V-CHIP menu, press or to select
“CHANGE PASSWORD”, then press
.
1
Enter the same password again using Number
buttons (0–9) for safety, then press ENTER.
3
Press MENU repeatedly until the menu screen
is cleared.
4
////
MENU
0-9/ENTER/CANCEL/MENU
0-9/ENTER/CANCEL/MENU
0-9/ENTER/CANCEL/MENU
/ / /
CANCEL
MENU
0–9
ENTER
5T40301A [E]p27-32 3/1/05, 10:1627
To Next Page
Loading...
Need help?
General
