33
Playback (VCR)
Loading and unloading a cassette tape
Use only video cassette tapes marked .
Loading
Remove the erase prevention tab with a screwdriver.
Cover the hole with a piece of adhesive tape.
To record again
Screwdriver
Automatic tape eject
This unit will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its beginning,
the cassette tape will be ejected automatically.
Press STOP/EJECT on the front panel or remote
control.
Push the center of the tape until it is automatically inserted.
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left. An
inverted cassette tape cannot be inserted.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Automatic power ON
When you insert a cassette tape the unit power will turn ON automatically.
1
2
Erase prevention tab
Adhesive tape
Remove the cassette tape.
Erase prevention tab
Unloading
To prevent accidental erasure
To prevent accidental erasure
Tape speed and maximum recording time
Playback (VCR)
Notes:
• Always eject the tape when not in use.
• The cassette tape can be ejected even if the POWER is “OFF”.
Video cassette tape
Tape Speed
SLP (Super Long Play)
T-160 T-120 T-90 T-60 T-30
2-2/3 hours 2 hours 1-1/2 hours 1 hour 30 minutes
8 hours 6 hours 4-1/2 hours 3 hours 1-1/2 hours
SP (Standard Play)
or
5T40301A [E]p33-37 3/1/05, 10:1733
To Next Page
Loading...
Need help?
General
