EasyManua.ls Logo

Toshiba MW24FP1 - Connections; Antenna Connections

Toshiba MW24FP1
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
S!!¸¸"_!!_iiJi_
tenna connections
if you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system.
if you are using a cable TV service (CABLE), see page 14 for Cable TV connections.
Antenna Antenna
jack jack
75 ohm coaxial cabte
(not supplied)
300-75 ohm matching
transformer (supplied)
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack,
If your combination VHF/UHF antenna has a 300
ohm twinqead wire, the use of the 300-75 ohm
matching transformer may be necessary.
o
o
1#
o
¢#
÷
Antenna
jack 300-75 ohm matching
transformer (supplied)
t ;Z3e 0 V F-,3e0a0
(not supplied) (not supplied)
Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300
ohm twin-lead wire to the 300-75 ohm matching
transformer. Attach the transformer to the combiner,
then attach the combiner to the antenna jack.
÷
Antenna
iack
twin-lead wire
(not supplied)
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the combiner (not supplied).
Attach the combiner to the antenna jack.
13
5L00201C [E]p13-17 13 _ 20/4/04, 16:04

Other manuals for Toshiba MW24FP1

Related product manuals