in1_:,w¢
÷
You must set the date and time manually for timer recordings,
ON/OFF timer and daylight saving time if the auto clock
process did not set them correctly.
r
EXAMPLE: Setting the clock to "8:30 AM", 27th. (SAT)
March, 2004.
1
Press MENU, then press <_or ,_ to setect []
option.
MENU _'r_ _O_K
CC) .....
_AYL
SETUP
Press t or _ to select "CLOCK SET", then
press "*.
Press 4'_ or _ to set the month, then press _,.
Set the day, year and time as in step 4, then
press ENTER,
After setting the dock, date and time starts
functioning automatically.
[] To make corrections any time during the process
Press _ or _ repeatedly until the item you want to
change blinks, then set the item again.
" MENU
ENTER
Notes:
, After a power failure or disconnection of the power_ the timer
settings will be lost. In this case_ reset the present time.
, When you set the minute, you can change in 1Gminutes step
by holding down _ or ,_.
6#
÷
21
5L00201C [E]p18-21 21 _ 20/4/04, 16:05
To Next Page
Loading...
