Toshiba MW24FP1 - Basic Playback (DVD); Basic Playback

a disc
This section shows you the basics on how to play a disc.
CAUTBON
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
÷
Preparations:
• Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. If the AC cord ptug is ptugged in for the first time,
you need to set "Starting setup" [_.
• When connecting to other equipment, turn the power off.
Press POWER on the unit or on the remote control
to turn on the unit.
The Power indicator will light.
• Every time you press POWER, the unit starts from
TV/VCR mode.
• When using an amplifier, switch on the amplifier.
POWER
Press DVD to select DVD mode.
The DVD startup screen wilt appear on the screen.
"Reading" display wilt change to "No Disc". (If DVD
disc has already loaded, playback wilt start automati-
cally.)
No Disc
DVD
0
Press OPEN/CLOSE.
The disc tray opens.
OPEN/CLOSE
±
P_aee the disc on the disc tray.
_._ With the playback
side down
• There are two different disc sizes. Place the disc in
the correct guide on the disc tray. tf the disc is out of
the guide, it may damage the disc and cause the unit
to malfunction.
• Do not place a disc which is unplayable on the disc tray.
Press OPEN/CLOSE or PLAY.
OPEN_CLO_EPLA_ The disc tray closes automatically.
" On the TV-screen, '_" changes to
_ OR _ "Reading" and then playback
commences.
• A menu screen will appear on the TV screen, if
the disc has a menu feature.
Press 1_/_'/_/"_ to select titte, then press ENTER.
Title is selected and play commences.
Press STOP to end playback.
STOp
u
m Resuming facility
• The unit records the stopped point,
depending on the disc. 'm"
appears on the screen. Press PLAY
to resume playback (from the scene
point).
• If you press STOP again or unload
the disc ('E" appears on the screen.),
the unit will clear the stopped point.
I To start playback in the stop mode
Press PLAY.
PLAY
Notes:
If the unit does not operate properly:
Static electricity, etc. may affect the player's operation. Dis
connect the AC power cord once, then connect it again.
° When you select the TV/VCR mode during DVD playback, DVD
playback will change to the still mode, and after 5 minutes it
will change to the resuming playback mode automatically.
44
5L 0201C [E]p44-47
÷
20/4/04.16:07
÷