Toshiba MW27FPX - Page 21

DISASSEMBLY INSTRUCTIONS
B1-3
FE Head
2
2
2
VCR Deck
AC Head Cover
1
Bottom Plate
3
1-9: VCR DECK (Refer to Fig. 1-9)
NOTE
Do not remove the cable at the FE Head section. The FE
Head may be damaged if you remove the cable by force.
1.
2.
3.
4.
5.
6.
7.
Move the Cassette Holder Ass'y to the back side.
Remove the screw 1.
Remove the FE Head.
Remove the 3 screws 2.
Remove the screw 3.
Disconnect the following connectors:
(CP101, CP4501 and CP4502).
Remove the AC Head Cover and VCR Deck in the
direction of arrow.
Fig. 1-9
1-10: VCR PCB (Refer to Fig. 1-10)
1.
2.
3.
4.
Remove the screw 1.
Remove the 6 screws 2.
Remove the AV Jack Shield.
Remove the VCR PCB in the direction of arrow.
2
2
1
VCR PCB
Bottom Plate
2
AV Jack Shield
Fig. 1-10
1-8: POWER PCB (Refer to Fig. 1-8)
1.
2.
3.
Remove the 3 screws 1.
Disconnect the following connector: (CP1704).
Remove the Power PCB in the direction of arrow.
Fig. 1-8
1
1
1
Bottom Plate
Power PCB
2
2
2