Toshiba PDR-M25 - Using Your Camera Correctly; Notes On Handling Your Camera

11
7
Install TN-LCD on
top cover, drive the
screws 01635-177*2
to fix the SW
l Examine the connections
between SW and
FLASH&MCU are
correct.
Screw
driver
8

Solder the wires
l SW & FLASH, the green
wire is positive, the
orange wire is negative.
Soldering
Iron,
Tweezers
9
Make up the wires
l The wires cannot be
mixed together
Tweezers
10

Solder the wires &
arrange the wires
 
Soldering
Iron,
Tweezers
11


Drive the screws
01635-286 &
01635-179
l Do not squeeze the wires
by PCB.
Screw
driver
12


Arrange the wires
l The four wires should be
parallel arranged.
Tweezers
13


Rear cover assembly
l Confirm the kinks are at
the right positions and
tight fixed.