108
Utilities
System Settings
❖ Boot Options—Allows you to modify boot settings
❖
Panel open/Power on—Allows you to turn on the
computer when opening the display panel while the
computer is turned off.
❖
Power On By AC—Allows you to turn on the
computer by plugging in the AC adaptor.
❖
Keyboard—Allows you to access the wake-on
keyboard function, or to configure the function keys
❖
Function Key—Allows you to set options for the
notifications from the Function key
❖
USB—Allows you to set USB options
❖
Legacy USB Support—Enables USB device
legacy emulation so that, even if your operating
system does not support USB devices, you can still
use a standard USB human interface device.
❖
System ON CDP Charge Mode—Allows you to
enable CDP (Charging Downstream Port) to use rapid
USB charge while the computer is powered on.
❖
SATA—Allows you to set conditions for SATA
❖
LAN—Allows you to set networking functions
❖
Undock and Sleep—Allows you to set sleep
conditions when undocking
❖
Advanced Options—Allows you to set conditions for
various functions:
❖
Web Camera—Allows you to enable/disable the
Web Camera.
❖
SD Host Controller—Allows you to enable/disable
the SD Host Controller.
❖
Intel
®
Turbo Boost Technology 2.0—Allows you
to enable/disable the Intel Turbo Boost Technology
2.0 function.
❖
Memory Performance Mode—Allows you to set
the memory mode.
❖
Critical Battery Wake-up—Allows you to
enable/disable the system wake-up when remaining
battery life is critical.
To Next Page
Loading...
