140
If Something Goes Wrong
Sound help
Check and set default speakers
1 In the Search field, type Change system sounds.
2 Click or touch
Change system sounds.
3 Click or touch the
Playback tab.
4 Select a playback device.
5 Click or touch the
Set Default button.
If only one playback device is listed, that device is set as
the default automatically.
6 With the default playback device selected, click or touch
the
Configure button.
(Sample Image) Speaker Setup window
7 Click or touch Stereo in the “Audio channels” box.
If “Stereo” is not available select any other available
option.
8 Click or touch the
Test button to send sound to each
speaker, or click or touch an individual speaker to send
sound to it.
9 If sound is heard correctly from each speaker, your
speaker setup is complete.
NOTE
NOTE
To Next Page
Loading...
