134
If Something Goes Wrong
Display problems
Some computers may have an Advanced tab (or
similar) to change the touchpad properties.
3 You can now change the configuration settings of your
touchpad.
Display problems
Here are some typical display problems and their solutions:
The screen is blank.
Display Auto Off may have gone into effect. Press any key to
activate the screen.
If you are using the built-in screen, make sure the display
priority is not set for an external monitor. To do this, press
the
FN + ( ) keys. If this does not correct the problem,
press the
FN + ( ) keys again to return the display priority
to its previous setting.
HINT: Pressing the FN + ( ) keys several times will
advance you through the display options.
If you are using an external monitor:
❖ Check that the monitor is turned on.
❖ Check that the monitor’s power cord/cable is firmly
plugged into a working power outlet.
❖ Check that the cable connecting the external monitor to
the computer is firmly attached.
❖ Try adjusting the contrast and brightness controls on the
external monitor.
❖ Press the
FN + ( ) keys to make sure the display
priority is not set for the built-in screen.
The screen does not look correct.
To choose a theme for your desktop background:
1 In the
Search field, type Change the theme.
2 Click or touch
Change the theme.
3 Select one of the available options.
You can also change the settings for individual components
separately by selecting each item.
For more information, see the Windows online Help.
NOTE
To Next Page
Loading...
Need help?
General
