61
Archive
The Archive operation is used for the one-time backup of files that
you no longer need to access on a regular basis but that you need
to store indefinitely, such as finished projects, photo archives,
important document, etc.
Archive is similar to Backup in that files are saved to a Backup
Store, but Archive is not tied to any specific Backup Store. You can
archive files to any available Backup Store; you can also create
a new Backup Store for the archive.
With Archive you have the option to erase files from the source
volume once they are copied to the Backup Store.
How to run an Archive operation
1. Click the Archive icon in the Backup group. The Archive Files
window will open displaying a list of mounted disks (volumes).
2. To select a disk as the source volume, check the box Next to the
disk and click Next.
To use a folder as the source volume, you must first define that
folder as a volume. To do so, select a disk and click the Sub-volume
button. The Browse window will appear, listing the folders currently
Other Backup Operations
To Next Page
Loading...
