EasyManua.ls Logo

Toshiba RAS-07S3KHS-EE User Manual

Toshiba RAS-07S3KHS-EE
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AIR CONDITIONER (SPLIT TYPE)
INSTALLATION MANUAL
Indoor unit
RAS-07S3KHS-EE
Outdoor unit
RAS-07S3AHS-EE
1115551134
ENGLISH
PУCСКИЙ
01_1115551134-EN.indd 101_1115551134-EN.indd 1 1/13/2558 BE 2:36 PM1/13/2558 BE 2:36 PM
Question and Answer IconNeed help?

Do you have a question about the Toshiba RAS-07S3KHS-EE and is the answer not in the manual?

Toshiba RAS-07S3KHS-EE Specifications

General IconGeneral
BrandToshiba
ModelRAS-07S3KHS-EE
CategoryAir Conditioner
LanguageEnglish

Summary

Safety Precautions

Warning and Cautionary Advice

Safety advice categorised into WARNING, CAUTION, and DANGER for installation and use.

General Public Use Electrical Requirements

Specifies electrical cord requirements for general public use in installations.

New Refrigerant Installation Guidelines

Details specific precautions for installing air conditioners using R410A refrigerant.

Power Disconnection Procedure

Instructions on how to safely disconnect the appliance from the main power supply.

Report to Local Power Supplier

Mandatory step to report appliance installation to the local power supplier.

Installation Diagram and Parts

Optional Installation Parts List

Details of optional parts available for installation, including part codes and names.

Outdoor Unit Fixing Arrangement

Guidance on securing the outdoor unit, including bolt specifications and drain nipple attachment.

Indoor Unit Installation

Indoor Unit Installation Place

Criteria for selecting an appropriate location for the indoor unit to ensure proper operation.

Remote Control Placement

Recommendations for placing the remote control to ensure optimal signal reception.

Cutting Hole and Mounting Installation Plate

Step-by-step guide for cutting wall openings and mounting the indoor unit's installation plate.

Indoor Unit Electrical Work

Requirements and procedures for connecting the indoor unit to the power supply.

Piping and Drainage Procedures

Piping and Drain Hose Installation

Instructions for routing and insulating refrigerant pipes and drain hoses for the indoor unit.

Indoor Unit Fixing

Steps for securely mounting the indoor unit onto the installation plate.

Outdoor Unit Installation

Outdoor Unit Installation Place

Guidelines for selecting a suitable location for the outdoor unit considering noise and wind.

Refrigerant Piping Connection

Detailed instructions on flaring pipes and connecting refrigerant lines to the outdoor unit.

Evacuating the System

Procedure for removing air and moisture from the refrigerant lines using a vacuum pump.

Outdoor Unit Wiring Connection

Steps for connecting the electrical wiring between the indoor and outdoor units.

Operation and Settings

Gas Leak Test

Methods for checking refrigerant leaks at flare nut connections.

Remote Control A-B Selection

Instructions for setting remote control addresses to manage multiple indoor units.

Test Operation Procedure

Steps to perform a test run of the air conditioner to verify functionality.

Auto Restart Setting

Guide on how to enable or disable the auto-restart function after a power failure.

Related product manuals