Need help?Do you have a question about the Toshiba RAS-13NAV-E and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | RAS-13NAV-E |
| Category | Air Conditioner |
| Language | English |
Details unit model, capacities, power, and electric characteristics.
Illustrates current vs. compressor speed for cooling and heating.
Shows how capacity changes with outdoor temperature for cooling/heating.
Crucial safety precautions for R410A handling and installation.
Guidelines for installing refrigerant piping, including materials.
Procedures for cutting, burr removal, and flare processing of pipes.
Specifications for flare dimensions for R410A and R22.
Reference values for tightening torque of flare connections for R410A.
Lists required tools specific to R410A and general tools.
Detailed diagrams of the indoor unit's structure and dimensions.
Detailed diagrams of the outdoor unit's structure and dimensions.
Wiring diagram for the 13NKV indoor unit and basic failure checks.
Wiring diagram for the 16NKV indoor unit and basic failure checks.
Wiring diagram for the outdoor unit, including inverter assembly.
List of electrical components for the 13NKV indoor unit.
List of electrical components for the 16NKV indoor unit.
List of electrical components for the 13NAV outdoor unit.
List of electrical components for the 16NAV outdoor unit.
Diagrams illustrating the refrigerant flow for 13 and 16 series models.
Performance data including pressure and temperature for cooling/heating.
Diagram showing the control flow and components within the indoor unit.
Diagram illustrating the control logic of the outdoor unit's inverter system.
General control strategy, capacity, power factor, prevent-freezing, louvers, and fan control.
Details on Cooling, DRY, Heating, ECONO, Hi POWER, QUIET, Temporary, Auto Restart, and Filter Check.
Explanation of remote control buttons, functions, and display indicators.
Precautions for power supply cords and refrigerant handling.
Diagrams showing correct placement and clearances for unit installation.
Lists of optional parts and standard accessories included with the unit.
Tools required for R410A installation, highlighting new tools and changes.
Guidance on selecting an appropriate location for the indoor unit.
Steps for cutting wall openings and mounting the installation plate.
Details on power supply connection and wiring practices.
Instructions for connecting the indoor unit's wiring.
Guidance on routing refrigerant pipes and drain hoses.
Steps for securely mounting the indoor unit and ensuring proper drainage.
Criteria for selecting the installation site for the outdoor unit.
Steps for flaring copper pipes for refrigerant connections.
Procedure for evacuating air from the system using a vacuum pump.
Instructions for connecting the outdoor unit's power and control wiring.
Procedures for testing for gas leaks and performing initial operation tests.
How to enable or disable the auto restart feature of the unit.
Covers initial checks, primary judgment, and LED error code interpretation.
Diagnosing issues via remote control, symptoms, wiring failures, and specific error codes.
Procedures for diagnosing outdoor unit issues and testing key components.
Steps for replacing indoor unit components like front panel, electrical parts, and louvers.
Procedures for removing and replacing the heat exchanger and fan motor.
Instructions for replacing the cross flow fan and base bearing.
Steps for replacing the microcomputer and associated P.C. boards.
Procedures for accessing and replacing outdoor unit parts like inverter and cabinets.
Replacing the outdoor fan motor, compressor, and reactor.
Procedure for replacing temperature sensors and handling common service parts.
Exploded view and parts list for indoor unit E-parts assembly.
Detailed exploded view and parts list for the indoor unit.
Exploded view and parts list for the 13NAV outdoor unit.
Exploded view and parts list for the 16NAV outdoor unit.
Exploded view and parts list for outdoor unit E-parts assembly.
To Next Page
