Need help?Do you have a question about the Toshiba RAS-13N3KV Series and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | RAS-13N3KV Series |
| Category | Air Conditioner |
| Language | English |
Covers R410A, power disconnection, and critical danger/warning notices.
Advises on placement away from heat, gas, moisture, and handling sharp edges.
Highlights the requirement to inform the local power supplier before installation.
Illustrates the layout and connection points of indoor and outdoor units.
Lists and describes optional parts like piping and insulation.
Guides on selecting the ideal location for the indoor unit and remote control.
Instructions on drilling holes, mounting the wall plate, and initial wiring.
Step-by-step guide for connecting cables and setting up wired remote control.
Covers air inlet grille installation and drain hose/cap handling.
Guidance on shaping, insulating, and connecting pipes and hoses.
Steps for firmly attaching the indoor unit to the wall mount.
How to perform a drainage test to ensure proper water outflow.
Criteria for choosing an appropriate site for the outdoor unit.
Details on connecting refrigerant pipes between units.
Covers pipe flaring and securing connections with specified torque.
Steps for evacuating air and using a vacuum pump.
Instructions for connecting power supply and wiring to the outdoor unit.
Fine-tuning location for signal reception and unit placement.
Procedures for plate mounting, drilling, and internal wiring.
Detailed steps for connecting cables and setting up wired remote control.
Covers air inlet grille installation and drain hose/cap handling.
Guidance on pipe bending, insulation, and drain hose connection.
Steps for securing the indoor unit and testing the drainage.
Criteria for outdoor unit placement and refrigerant pipe connection.
Instructions for tightening flare nut connections and shaping pipes.
Process for evacuating air from the system using a vacuum pump.
Power supply and voltage specifications for the outdoor unit.
Connecting the outdoor unit's power and control cables.
Performing leak tests and initiating test operations.
Setting up remote controls and the auto restart function.
To Next Page