EasyManua.ls Logo

Toshiba RAS-13N3KCV Series User Manual

Toshiba RAS-13N3KCV Series
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AIR CONDITIONER (SPLIT TYPE)
INSTALLATION MANUAL
Indoor unit
RAS-13, 16N3KCV Series
Outdoor unit
RAS-13, 16N3ACV Series
1110251267
ENGLISH
ESPAÑOL
FRANÇAIS
BAHASA MELAYU
TIEÁNG VIEÄT
Cover 1110251267.indd 1Cover 1110251267.indd 1 7/2/12 3:46 PM7/2/12 3:46 PM

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Toshiba RAS-13N3KCV Series and is the answer not in the manual?

Toshiba RAS-13N3KCV Series Specifications

General IconGeneral
BrandToshiba
ModelRAS-13N3KCV Series
CategoryAir Conditioner
LanguageEnglish

Summary

Precautions for Safety

New Refrigerant Air Conditioner Installation

Safety warnings and precautions for using new HFC refrigerant (R410A).

Report to Local Power Supplier

Mandatory reporting of appliance installation to the local power supplier.

Installation Diagram of Indoor and Outdoor Units

Optional Installation Parts

Lists optional installation parts like piping, insulation, and tapes.

Outdoor Unit Fixing Bolt Arrangement

Instructions for securing the outdoor unit with bolts for wind resistance.

Indoor Unit Installation Details

Indoor Unit Installation Place

Guidelines for selecting a suitable location for the indoor unit.

Remote Control Placement

Recommendations for positioning the remote control for optimal signal reception.

Mounting Plate Installation

Steps for cutting holes and mounting the installation plate.

Indoor Unit Electrical Work

Requirements and procedures for electrical connections and power supply.

Indoor Unit Wiring Connection

Connecting Cable Wiring

Detailed steps for connecting the main power and control cables between units.

Wired Remote Controller Connection

Remote Controller Wiring Procedure

Procedures for connecting the remote controller via wire for operation.

Piping and Drain Hose Installation

Drain Hose Management

Procedures for removing, fixing, and changing the drain hose and cap.

Pipe Installation and Bending

Guidelines for shaping, connecting, and bending pipes for various installation types.

Indoor Unit Fixing and Drainage

Indoor Unit Securing

Steps for securely mounting and fixing the indoor unit to the installation plate.

Drainage System Setup

Guidelines for installing the drain hose for effective water removal.

Outdoor Unit Installation Place

Outdoor Unit Location Criteria

Factors to consider when choosing a location for the outdoor unit.

Refrigerant Piping Connection

Pipe Flaring Procedure

Steps for cutting and flaring the ends of refrigerant pipes.

Connecting Pipe Tightening

How to properly tighten pipe connections using torque wrenches.

Pipe Shaping and Positioning

Guidance on bending and fitting pipes according to unit specifications.

System Evacuation

How to remove air and moisture from refrigerant lines using a vacuum pump.

Wiring Connection

Connecting Cable Details

Instructions for connecting the main cable to unit terminals.

Other Operations and Settings

Gas Leak Test Procedure

How to check for refrigerant leaks using detection methods.

Remote Control A-B Mode

Setting remote control mode for managing multiple indoor units.

Test Operation Guide

Steps to perform a test run of the air conditioner.

Auto Restart Function Setup

How to configure the auto restart feature for power interruptions.

Related product manuals